Metal Roof Installation Instructions

Metal roofs are durable and long lasting. Metal roof and take a long time from now, the materials used in the construction of a wider development. Color, structure and design have made the changes they have interesting items to decorate the roof tops. In the following content you may know about the metal roof installation instructions that will allow you to create a metal roof for your home. Before I know what kind of story about the popularity of metal roofing.

Metal Roofing Types

Metal roof installation

1. Standing Seam Metal Roofing: It's easy to raise if the standing seam metal roof installation instructions are followed properly. They have light weight and durability. The metal is usually coated with aluminum-zinc allow offering long lasting protection.

2. Corrugated Metal Roofing: They have contemporary designs and have oxidized finish and are pre-painted . Modern houses mostly adopt this kind of roofing as they are extremely resistant even during hurricanes and tornadoes.

3. Residential Metal Roofing: They are also known as tin, galvanized iron or copper roofing and are widely used in residential houses and quarters. They are weather resistant and highly durable. They have a long lasting effect and are inexpensive.

How to Install Metal Roofing
Metal roof installation instructions shall present you the techniques to construct a metal roof accurately. The following content will let you know how to install metal roofing. You need to arrange for the materials beforehand and then go ahead with the techniques. Know the metal roof installation procedures and then follow the process in a stepwise manner.

Materials Required
- Flashing
- Ladder
- Nails
- Coating layer
- Panels/shingles
- Metal snips
- Wooden stapler
- Counter flashing



The Procedure
- First gather the materials required for construction of the metal roof.
- Determine the type of roofing you want and then procure the metal roofing materials accordingly. Metal roofing kits, containing all the essentials are available in the hardware shops.
- Place the ladder firmly on the ground and attach it to the roof. Wear non-slip shoes while climbing the ladder.
- The first step starts with removal of existing roofing materials. The shingles can be easily loosened with chisel and hammer. Take them out and then replace with new ones.
- The entire roof base is then covered with a roofing paper, tacked in place with a wooden stapler.
- The perimeter of the roof is edged with the metal, that come along with the standard kit. The edging is nailed across the metal with a hammer.
- Now each panel is laid across the frame of the roof. The panels are overlapped with the next (2-3 inches) with a hammer. The nails are also packed in the kit and the spacing is approximately 1 foot.
- Steel/tin/aluminum snips are cut according to the size of the panels. They are interlocked with the base of the roof.
- Trim kits and flashing materials are available, that are installed over the panels for the shiny effect. This steps completes the metal roofing installation process, usually followed by people to raise a metal roof in the most cost effective way.